7 Snowblower Maintenance Tips You Need to Know

For many of us, tackling heavy snow can  feel like an insurmountable burden. However, heavy snow doesn’t have to be challenging when you quality snowblower. As long as you keep your snowblower in tip-top shape and ensure that its parts are in good working condition, you’ll be ready for winter! 

Unfortunately, some people fail to realize the importance of snowblower maintenance  until it’s too late. Just like any other machine or equipment, a snowblower needs proper care and service in order to remain efficient and available when you need it most. After all, the last thing you want is for your snowblower to break down just when a big storm is upon you.

So, how do you keep your snowblower in tip-top shape? Here are some guidelines for you to follow.

Do a thorough inspection

Before winter arrives, it’s important for you to take the time to inspect your machine. Take a close look at its parts and components. Check the bolts, screws, nuts, and belts, and make sure that everything is tight. Also, check the belts to see if they are worn out or need replacing. If they are still in good working condition, just be sure they are tightened. Also, don’t forget to check the starter cord and inspect if there are any signs of fraying.

Drain the fuel

Another important task to tackle before winter starts is making sure you’ve gotten rid of any remaining fuel in your snowblower. While some experts claim that fuel can be left in the tank if a stabilizer is added, having a dry engine is still highly recommended. 

Be sure to drain the engine as much as you can. Then, start the snowblower until the remaining gas runs dry. You may also consider using a small amount of ethanol-free fuel before running the engine dry again. Let the engine cool down before draining the carburetor bowl. 

Change the oil

Once the remaining oil has been drained out, the next step is to replace it with fresh fluids. Refill the oil to the desired level. 

To do this, start your machine and give it a few minutes to warm up. Refill your engine with oil based on the recommended levels. Turn the engine back on and check the oil levels. Be sure to tighten the drain plug to avoid any leaks. 

Replace the spark plug

The spark plug plays an important role in igniting the fuel so that your engine can start and run properly. If this is something you haven’t done before, it’s best to take care of it before winter comes. 

Refer to your owner’s manual for specific instructions, and make sure that you have the right replacement parts. When switching the spark plug, make sure the lead wire is removed and remove the plug with a socket wrench. Attach the new spark plug and re-attach the lead wire. Be careful not to over-tighten the new spark plug. 

Don’t forget to lubricate

When lubricating the drive and chassis, it’s imperative to refer to the owner’s manual to make sure you’re using the right type of lubricant. Turn your snowblower on its side so you can easily reach all of the components. Make use of this time to also inspect the additional parts. 

Inspect the tires

The right amount of air in the tires can help your snowblower get the best traction. Take the time to check the tires and ensure they are properly inflated. Generally, 15 to 20 pounds per square inch is recommended. Again, it’s always best to refer to your owner’s manual for the precise specs. Don’t skip this step, even if your snowblower is still relatively new.

Take good care of your batteries

The batteries in your snowblower can last longer if they’re well taken care of. Extend their longevity by following the manufacturer’s recommendations when it comes to recharging batteries.

Snowblowers are extremely useful pieces of equipment during the cold months. Take good care of your equipment by following these tips for snowblower maintenance. 

If you’re looking for quality repair services for your snowblower and other small engines, please visit Greg’s Small Engine